Your Cart

SuperATV Polaris RZR 800 6" Portal Gear Lift

  • Availability: In Stock
  • Brand: Super ATV
  • Model: PGH6-RZR800
$2,899.95
Ex Tax: $2,899.95


Available Options

Ships today if ordered in the next:
Day
Hour
Min
Sec
Estimated delivery by : Enter City & Zip

Features:

  • Available with billet or cast aluminum housing
  • 9310 alloy billet steel precision ground gears are cool and quiet
  • Increases width by 4 in. per side (8 in. total)
  • 1.5 in. diameter 4340 hardened steel drive shaft
  • No leak bearings and seals
  • Universal hub fits all major bolt patterns
  • Comes complete with all hardware, backing plates, brakes lines and instructions

Wheel Requirements:
  • 18” or larger wheel required
  • Wheels cannot exceed 5” backspacing

Gen 3 Portals are Geared for All
SuperATV’s GDP 6” Portal Gear Lift for the Polaris RZR 800 gives you a lift and a gear reduction in one box. Get the clearance to run bigger tires and the torque you need to turn them. The lift and gear reduction are in the hub which means they maintain suspension geometry and reduce drivetrain stress. Customize by choosing between a 30% or 45% gear reduction and selecting a cast or billet aluminum housing. GDP portals are truly geared for all. 

45%–Perfect for Mud
Install big 6” portals with a 45% gear reduction to get clearance for huge tires and a massive boost in torque. It’ll turn your monster tires like they’re stock and take your RZR through the biggest, thickest mud holes you can find. These portals are built for performance — just see how far you can send mud flying.

45%–Perfect for Rocks
A 6” portal box with a 45% gear reduction gives you tons of torque to crawl over any rock or boulder you can find. With that much power, rock shelves will feel like speed bumps and boulders feel like pebbles. With 6” of clearance, you can run bigger tires and dominate nastier rock gardens.

30%–Perfect for Everything
A 30% gear reduction lets you turn bigger tires and gives you the versatility to run mud, dominate trails and hills, and maintain high speed on the road. It gets your power to the ground to make your UTV more capable no matter where your adventures take you.

Better Gears
Our gears are precision ground and made with 9310 billet steel alloy for high strength and high speed. That means they’re cool and quiet even when you’re hammering down the throttle on the road, and they have strength to withstand every ride.

Stronger Housings by Design
If you’re looking for the strongest gear boxes you can get, look no further. We make our gear boxes by design, and the hundreds of thousands of ride hours prove that our housings have what it takes to go hard. Whether you want a gorgeous, USA-made billet aluminum housing or a cast aluminum housing, you know you’re getting stronger housings made with unmatched experience.

  • Our housings are reinforced in all the right places
  • They’re built with better oil flow and gearing forces in mind
  • There are no gimmicks and no vents because vents do more harm than good—we know because we tested them


Advanced Gaskets and Seals
Whether you go with cast or billet, both housings use:

  • Advanced gaskets with excellent oil resistance and a lower deterioration rate than Kevlar gaskets
  • A sealed input gear and double-lipped output seal
  • 100% sealing coverage throughout so you can forget about oil leaks

Polaris RZR 800 Portal Gear Reduction Recommendations

Tire Size

Required Suspension Setup with 6" Portals

Recommended 6" Portal Gear Reduction

Up to 34"

5" Lift Kit

30%

Up to 34"

6" Lift Kit

30%

Polaris RZR S 800 Portal Gear Recommendations

Up to 32"

5" Lift Kit

30%

Polaris RZR 4 800 Portal Gear Recommendations

Up to 34"

5" Lift Kit

30%

Gear reductions listed are general guidelines to maximize torque and maintain factory top speed. A larger than recommended gear reduction will result in more torque and lower top speed. Give us a call for more information. 

1Lift Kit Specs
ATV or UTVUTV
MakePolaris
ModelRZR
Size Lift6"

Write a review

Note: HTML is not translated!
Bad Good
Polaris RZR 800 : 2008-2014
Polaris RZR 4 800 : 2010-2014
Polaris RZR S 800 : 2009-2014
NOTE: Wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1” wheel spacer

⚠ California Proposition 65 Warning ⚠

WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.
Track Order