Plenty of riders don’t need a giant mud tire. They need a fresh set of rubber in a stock-friendly size that looks sharp and gets the machine back on the trail. That is where a 25-inch package on 12-inch wheels fits right in.
This Sedona Rip Saw RT kit on System 3 ST-6 Machined Wheels pairs (2) 25×8-12 tires with (2) 25×10-12 tires, all mounted on System 3 ST-6 machined wheels.
Why the sizes are staggered
The kit uses narrower 25×8-12 tires up front and wider 25×10-12 tires in the rear. That front-and-rear split is common on ATVs. A narrower front tire is easier to steer and turns in cleanly on tight trails, while the wider rear puts more rubber down where the power goes. Keeping both at 25 inches tall means the machine sits level and the gearing stays close to where the factory set it.
System 3 ST-6 wheels
The System 3 ST-6 wheel comes in a machined finish, which gives it a bright, clean look that stands out against black tires. A 12-inch wheel also leaves plenty of sidewall on a 25-inch tire, and that extra sidewall helps soak up roots and rocks for a more comfortable ride.
What comes in the package
- Four Sedona Rip Saw RT tires: two 25×8-12 and two 25×10-12
- Four System 3 ST-6 machined wheels with the tires mounted
- Lug nuts
- Center caps
Having lug nuts and caps in the box means you can bolt the set on as soon as it arrives instead of running to the store for hardware.
Check fitment first
Before ordering any tire and wheel kit, confirm the bolt pattern and offset for your machine and make sure the wheels match it. Check your stud thread size for the lug nuts, too. Also think about clearance. If your ATV runs smaller tires from the factory, look at fenders, A-arms and suspension travel to make sure a 25-inch tire will not rub. Some machines take this size without changes and some do not. Also remember that a taller tire than stock can change speedometer readings slightly and may change how the machine pulls from a stop.
Not sure what your machine needs? Call the Wild Boar team at 850-912-4350 with your year, make and model, and we will help you work out whether this package is the right match.
