Not every mud rider wants to go all the way to a 37 or bigger. A 35-inch tire is a sweet spot for a lot of builds. It is tall enough to make a real difference in deep ruts but still manageable for machines that have not had every drivetrain part upgraded.
This High Lifter Outlaw Max 35×10-22 tire and wheel kit on MSA M47 Sniper Gunmetal Milled Wheels gives you four tires on four wheels, plus the lug nuts and center caps.
High Lifter Outlaw Max at 35 inches
The Outlaw Max is a well-known name among mud riders. In a 35×10-22 size, it puts a tall tire on a large-diameter 22-inch wheel. That combination raises the frame and differentials higher off the ground and helps the machine roll over ruts, roots and holes instead of falling into them. A 10-inch width keeps the footprint narrow enough to cut down through soft mud toward firmer ground.
MSA M47 Sniper in Gunmetal Milled
MSA’s M47 Sniper wheel comes here in a Gunmetal Milled finish. Gunmetal is a darker, low-key color that hides trail grime better than a bright polished finish, and the milled accents give it some contrast. It is a good fit for riders who want a clean look without spending all evening with the wash brush after every ride.
A dark wheel under a black tire also gives the machine a tough, matched look from every angle.
Why 22-inch wheels
Large-diameter wheels with a lower-profile sidewall give a firmer, more precise feel, and they fill the wheel wells for a bold look. Riders often choose 22s for mud builds and for machines that also see some hard-packed roads, where a stiffer sidewall cuts down on squirm.
The trade-off is a little less cushion over sharp rocks than a smaller wheel with a taller sidewall, so think about the terrain you ride most before you decide.
Before you order
A 35-inch tire usually calls for a lift on most UTVs. Run through the basics:
- Match the wheels to your hub bolt pattern.
- Check offset and clearance at full steering lock and full compression.
- Make sure your axles and clutching are ready for a taller tire.
Give the Wild Boar team a call at 850-912-4350 with your machine and setup, and we will help you confirm this package fits.
