1280 Highway 97 - Molino, FL 32577 850-912-4350
Monday – Friday 9 AM – 4 PM CT

SuperATV Rear A-Arms for the Honda Talon 1000R

SuperATV rear A-arms for Honda Talon 1000R

The Honda Talon 1000R is built to go fast through rough country. That means the rear suspension takes a beating from rocks, logs and hard landings. When a stock rear arm gets bent, the machine does not track right and the fun stops.

SuperATV’s Honda Talon 1000R Rear A-Arms, available at Wild Boar ATV Parts, are a set of two rear arms built to be stronger than stock and give you more control over alignment.

1.25-inch tubing

The arms are made from 1.25-inch tubing, which SuperATV says is 25% larger than stock. Larger tubing gives the arm more strength to handle impacts from rocks and stumps, and the stress of hard riding on a performance machine like the Talon 1000R. The rear of a Talon sees a lot of force when you land a jump or power out of a rutted corner, so that extra strength is welcome.

Camber adjustment

An adjustable pivot block provides full camber adjustability. Being able to adjust camber at the rear helps you fine-tune how the Talon handles and how evenly the tires wear. It is especially useful if you have changed tire sizes or wheel offset. Set alignment carefully after installation.

Bushings included

SuperATV includes high-quality bushings with the arms at no extra cost. That saves you from pressing old bushings out of worn stock arms or buying a separate bushing kit. The arms are described as easy to install.

Built to last

A UV-resistant powder coat finish protects the arms against sun and weather. SuperATV also backs the arms with a lifetime warranty, which is a strong statement about durability for a part that lives where the rocks are.

Who should upgrade

  • Talon 1000R owners who have bent or damaged stock rear arms.
  • Riders who push hard through rocky or rutted terrain.
  • Anyone who wants rear camber adjustment for a modified setup.

Front and rear together

If you are upgrading the rear arms because the stock ones took a beating, take a look at the front arms too. Riders often replace both ends so the suspension is matched and equally tough. Doing both at once also means you only have to set alignment one time.

Fitment check

These arms are listed for the Honda Talon 1000R. Honda builds several Talon models, so confirm you have the 1000R before ordering. Questions? Call the Wild Boar team at 850-912-4350.

Shop the SuperATV Honda Talon 1000R Rear A-Arms