Forty inches is not a casual tire size. Machines wearing 40s usually have a lift, drivetrain upgrades and an owner who plans on going where shorter tires get stuck. If that describes your build, this is the kind of package you are shopping for.
The Quadboss QBT680 40×9.5-20 tire and wheel kit on ITP Hurricane Gloss Black wheels is a set of four tires on wheels, with lug nuts and center caps included.
Why riders go this tall
A 40-inch tire raises the whole machine, including the frame and differentials, which helps you clear deep ruts, stumps and the hump in the middle of a rutted trail. A taller tire also rolls over obstacles more easily than a short one that drops into every hole.
At 9.5 inches wide, this tire is tall and narrow. Narrow tires are popular with mud riders because they tend to cut down through soft muck toward firmer ground instead of floating on top of it. They also keep the overall width of the machine more manageable than a wide, tall tire would.
20-inch ITP Hurricane wheels
The tires ride on 20-inch ITP Hurricane wheels in a gloss black finish. A large-diameter wheel is the norm on tires this tall, and gloss black works with almost any color of plastics. Getting the tire and wheel together as a set means the sizing is already matched.
The package includes lug nuts and center caps, so the hardware question is answered before the box even arrives. That is one less trip to the parts counter while the machine sits on jack stands.
What to plan for with 40s
Tires this tall change a lot about how a machine behaves. Be honest about your build before you order:
- A lift kit is typically needed to clear the fenders and suspension
- Heavier axles help handle the extra leverage of a big tire
- Clutch work or gear reduction is common to get the power to the ground
- Expect a higher center of gravity, so take off-camber spots carefully
Confirm fitment before you buy
Check your machine’s bolt pattern and offset, and make sure your suspension and body have the clearance for a 40-inch tire at full steering lock and full compression. If you are still planning the build, call the Wild Boar team at 850-912-4350 and talk through what your machine needs to run 40s.


