There is a point in most UTV builds where the long travel kit is on, the axles are upgraded and the stock tires look tiny. That is when riders start shopping for 35s.
This Maxxis Carnivore 35×10-15 tire and wheel kit on SB-6 Matte Black Beadlock Wheels is built for that moment. It includes four Maxxis Carnivore tires on four SB-6 wheels in matte black, plus lug nuts and center caps.
The Carnivore name
The Maxxis Carnivore is a well-known name among UTV riders and is often chosen by riders who want an aggressive all-around tire for trails and rough terrain. Putting it in a 35-inch size gives a big, imposing footprint and a lot of height under the machine.
35×10-15 in plain terms
A 35-inch tall tire gives major ground clearance and lets the machine roll over rocks, logs and ledges that would stop a smaller tire. The 10-inch width keeps the tire from getting too wide for most trails. A 15-inch wheel leaves a good amount of sidewall for flex and cushion, which helps on rocky ground.
SB-6 matte black beadlocks
The SB-6 is a beadlock wheel finished in matte black. Beadlocks use an outer ring to clamp the tire bead in place. That helps keep the tire seated when you air down for traction, which is a common practice on rocks and in sand. Matte black is a clean, understated finish that looks right on almost any machine and does not show trail grime as quickly as a bright finish.
What your machine needs for 35s
A 35-inch tire is a serious size. Most machines need long travel or a substantial lift kit to clear it. The added weight and diameter also put more load on axles, clutches and the rest of the drivetrain. Plan for those upgrades so the machine performs well and holds up.
- Confirm the wheel bolt pattern matches your hubs.
- Check the wheel offset against your suspension.
- Make sure tires clear at full lock and full compression.
- Upgrade axles and clutching as needed.
Get those pieces sorted before the kit arrives and the install goes much smoother.
Talk to us first
If you are not sure your machine is ready for this kit, call the Wild Boar team at 850-912-4350 and we will help you check fitment before you order.


