_Tires_on_MSA_M47_Sniper_Gloss_Black_Milled_Wheels_060426190111-1500x1500.png.webp)
Forty-four inch tires do not go on a weekend trail machine. They go on a side-by-side that has already been lifted, geared and reinforced for the deepest water and the thickest mud around.
If that describes your build, the Alliance 337 Deep Lug 44×11.2-24 (8-ply) Tires on MSA M47 Sniper Gloss Black Milled Wheels package is worth a look. You get four tires and four wheels, plus lug nuts and center caps.
A tall, narrow tire
A 44×11.2-24 measures about 44 inches tall and about 11.2 inches wide on a 24 inch wheel. That tall, narrow shape is popular in deep mud and water. A narrow tire tends to cut down through soft stuff toward firmer ground, and the height gives the machine a huge amount of clearance. The Alliance 337 carries a Deep Lug name and an 8-ply rating for a tougher carcass.
MSA M47 Sniper wheels
The wheels are MSA M47 Sniper in gloss black milled. The milled accents break up the black, so the wheel still stands out behind that much sidewall. A 24 inch wheel also means less sidewall than you would get with a small rim, which helps the machine feel more planted.
What a 44 inch tire requires
This is not a bolt-on-and-go size for most machines. Expect to need a portal gear lift or a major lift, often with heavy-duty axles and reworked clutching. Tall tires add a lot of leverage on the drivetrain, and without gear reduction a machine can struggle to turn them. Plan the whole package before the tires show up.
Weight matters too. Tires and wheels this size carry a lot of mass, and that rotating weight affects acceleration, braking and how hard the machine works on every climb. Builders who run 44s usually upgrade brakes and cooling along the way.
Everything in this package:
- Four Alliance 337 Deep Lug 44×11.2-24 8-ply tires
- Four MSA M47 Sniper gloss black milled wheels
- Lug nuts and center caps
Fitment check
Confirm your bolt pattern and the offset your build needs, then measure fender, frame and suspension clearance at full lock and full compression. With a tire this size, clearance at the rear of the wheel well is often the tightest spot.
If you are building a big machine and want a second set of eyes on fitment, call Wild Boar ATV Parts at 850-912-4350.
