ITP MT911 32×10-15 8-Ply on System 3 SB-5 Beadlock Wheels

Ever had a tire pop off the bead halfway up a rock ledge? It is one of the most frustrating ways to end a ride. The machine is stuck, the tire is flat, and reseating a bead on the trail is no fun.

That problem is a big reason riders choose this ITP MT911 32×10-15 (8ply) Tires on System 3 SB-5 Gunmetal Grey Beadlock Wheels package. Pairing tough tires with beadlock wheels makes a combination built for hard use.

What a beadlock does

On a standard wheel, air pressure is what holds the tire’s bead against the rim. Drop the pressure low for extra grip, and the bead can slip or pop off when the tire gets twisted on a rock. A beadlock wheel uses a ring that clamps the outer bead to the wheel. That lets riders run lower pressures with much less risk of losing the bead, which is a big advantage on rocks and other technical terrain. Lower pressure lets the tire flex and wrap around obstacles, putting more rubber in contact with the ground. Beadlocks also add a tough outer ring that can take some of the abuse when the wheel scrapes against a rock.

Why 8-ply tires pair well

The ITP MT911 tires in this kit are 32×10-15 with an 8-ply rating. Higher-ply tires are built tougher than many stock tires, which helps them resist punctures and sidewall cuts. Low air pressure plus sharp rocks is a hard combination for a tire, so tough construction and beadlock wheels make sense together.

System 3 SB-5 in gunmetal grey

The System 3 SB-5 beadlock wheels come in a gunmetal grey finish. The package includes:

• Four ITP MT911 32×10-15 8-ply tires
• Four System 3 SB-5 gunmetal grey beadlock wheels
• Lug nuts and center caps

Get in the habit of checking beadlock ring bolts regularly, just like you would check lug nuts.

Plan for 32-inch tires

A 32-inch tire needs room. Most machines need a lift kit and sometimes other changes to clear fenders, A-arms and the frame through full suspension travel and steering. Bigger tires also increase the load on clutches and axles, so plan your drivetrain along with your tires. Confirm the bolt pattern, offset and stud thread size for your machine before ordering.

If you want help figuring out whether your machine is ready for this kit, call the Wild Boar team at 850-912-4350.

Shop the ITP MT911 on System 3 SB-5 Beadlock kit