1280 Highway 97 - Molino, FL 32577 850-912-4350
Monday – Friday 9 AM – 4 PM CT

SuperATV 3-Panel Rear View Mirror with 1.75-Inch Clamps

SuperATV 3 panel wide angle rear view mirror with 1.75 inch clamps

Ride in a group long enough and you will hear it: “Where did everybody go?” With a helmet on, a cage around you and dust behind you, seeing what is going on to the rear of a UTV is harder than it should be.

SuperATV’s 3 Panel Rear View Mirror with 1.75″ Clamps, available at Wild Boar ATV Parts, gives you a wide look behind the machine without turning around in your seat.

Three mirrors, one wide view

A single center mirror shows you a narrow slice of what is behind you. This setup uses three mirror panels to increase both side and rear vision. The angles are adjustable, so you can aim the outer panels to cover the corners and blind spots while the center panel watches straight back. The result is an extremely wide viewing area, according to SuperATV.

Size and mounting

The mirror measures 20 inches wide, 2-1/4 inches tall and 1-5/8 inches deep. It comes with 1.75-inch brackets, which clamp onto roll cage tubing of that diameter. SuperATV describes it as easy to install. Before you order, measure your cage tube. A clamp that is the wrong size will not hold the mirror steady.

Where it helps most

  • Keeping track of the riders behind you on a group ride.
  • Watching for faster machines coming up on shared trails.
  • Backing up to a trailer, gate or tight trailhead parking spot.
  • Checking on a trailer or load you are towing.
  • Seeing traffic when crossing or riding along roads where that is legal.

A small part with a big payoff

Mirrors are not exciting upgrades, but riders who add one usually wonder how they went without it. Being able to glance up and see what is coming makes riding more relaxed and helps you react sooner. It also keeps you from twisting around in a harness, which is uncomfortable and takes your eyes off the trail ahead.

Setting it up

Once mounted, sit in your normal riding position with your helmet on and adjust each panel. Aim the center panel straight back and the outer panels toward the rear corners. Recheck the angles after your first rough ride, since vibration can shift things a bit.

Confirm the fit

Measure your cage tubing and confirm it matches the 1.75-inch clamps. If you are not sure, call the Wild Boar team at 850-912-4350 and we will help you figure it out.

Shop the SuperATV 3-Panel Rear View Mirror