Grizzly owners who ride mud usually know the routine. Ride, overheat, stop, dig the radiator out with a stick, rinse, repeat. Moving the radiator up is the fix, and it is a job many riders can handle in their own garage.
Our Yamaha Grizzly 550/700 Radiator Relocation Kit 07-13 is designed for 2007-2013 Grizzly 550 and 700 models. It comes with all the mounting hardware and detailed installation instructions. Here is an overview of what is in the box and what the job looks like.
What is included
The kit includes the mounting hardware needed to relocate the radiator, along with detailed instructions written for the Grizzly. Having the hardware and directions together means you are not hunting for parts at the hardware store or guessing at the next step.
Why move it at all
On the Grizzly 550 and 700, the radiator sits low in the front, right where the tires throw mud. Once mud packs the fins, air cannot get through and the engine runs hot. Relocating the radiator up high keeps it cleaner and lets it keep cooling when the front of the machine is buried in slop.
What the install looks like
Every kit is a little different, so follow the included instructions step by step. In general, a radiator relocation job involves:
- Draining the coolant into a clean pan.
- Removing the necessary plastics to reach the radiator.
- Disconnecting the hoses and fan wiring and pulling the radiator.
- Mounting the radiator in its new position with the kit hardware.
- Routing and connecting the hoses and wiring.
- Refilling coolant and bleeding air from the system.
Tips for a smooth job
Give yourself a full afternoon so you are not rushed. Take photos before you disconnect anything, especially wiring. Bleeding the air out of the cooling system is an important step. Trapped air can cause the Grizzly to run hot even with the radiator in its new spot. After the first ride, check the hose clamps, look for leaks and top off coolant if the level dropped.
Pair it with a snorkel
If your Grizzly also sees deep water, many riders add a snorkel kit to raise the intakes at the same time. With the plastics already off, it is a good time to do both.
Fitment check
This kit is listed for 2007-2013 Yamaha Grizzly 550 and 700 models. Confirm your year and model before ordering. Questions? Call the Wild Boar team at 850-912-4350.


