Brakes rarely fail all at once. They give warning signs first, and most riders miss them until the noise gets loud. On a Polaris General that hauls gear one day and runs trails the next, knowing those signs saves you rotors, money and a scary moment on a downhill.
When it is time for new pads, our Wild Boar Brass Brake Pads for the Polaris General (excluding XP models) are a strong choice. They are made for 2016 and newer General models, excluding XP models, and come with installation instructions.
Sign one: noise
A squeal can come from dust or moisture, but a grinding or scraping sound is a different story. Grinding often means the friction material is gone and metal is contacting the rotor. At that point the rotors are getting damaged with every stop. Do not keep riding on it.
Sign two: the pedal feels different
If the pedal feels soft, travels farther than it used to or needs more pressure to slow the General down, something has changed. Worn pads are one common cause. Low fluid or air in the lines can cause similar feelings, so check those too.
Sign three: pulling or uneven stopping
If the General pulls to one side under braking, one side may be worn more than the other, or a caliper may be sticking. Uneven wear is common on machines that see a lot of mud, because grit packs into one corner more than another.
Sign four: what you see
The surest check is a visual one. Pull a wheel and look at the pads. If the friction material is thin, cracked, glazed or uneven, replace them. Look at the rotors at the same time for deep grooves or scoring.
Why brass pads for the General
A lot of General owners ride in mud and water, and that is hard on brakes. Brass pads use a harder metallic material that is popular with mud riders because it holds up well in wet, gritty conditions. That makes them a good fit for a machine that does a bit of everything.
Fitment reminder
These pads are listed for 2016 and newer Polaris General models, excluding XP models. Double-check your model before ordering, and call the Wild Boar team at 850-912-4350 if you have questions.


