HCR Racing
Features:Clears 35" tiresEasy 100% bolt-on, no cut, no drill installation8" wider stance over stock track width to improve stability and confidenceHigh-clearance front and rear A-armsMade out of HCR proprietary alloy—30% stronger than chromoly steelCompatible with Smart-Lok DifferentialsIncludes pre..
$5,749.99
Ex Tax:$5,749.99
Features:Can-Am Defender Front Forward A-Arm and Rear A-Arm Suspension Kit will add lift without adding shock brackets.Pushes front arms forward 2.5" for more clearance to run up to 35” tires, depending on the tire manufacturerLaser-cut construction for precise fit and finishCNC'd chromoly mounting ..
$2,499.99
Ex Tax:$2,499.99
Features:Can-Am Defender Forward A-Arm Suspension kit will add lift without adding shock brackets.Pushes front arms forward 2.5" for more clearance to run up to 35” tires, depending on the tire manufacturerLaser-cut construction for precise fit and finishCNC'd chromoly mounting points for increased ..
$1,249.99
Ex Tax:$1,249.99
Features:3"+ high-clearance trailing arms and A-arms for easier navigation of trail obstaclesDesigned as an OEM, factory-width replacement for Maverick R A-armsProtects boots from damage and premature wearUses HCR’s proprietary elite alloy material 30% stronger in yield and tensile strength than 413..
$1,899.99
Ex Tax:$1,899.99
Features:3"+ high clearance for easier navigation of trail obstacles.Designed as an OEM, Factory-Width replacement for Maverick R trailing arms.Protects boots from damage and premature wear.HCR’s Proprietary Elite Alloy Material is 30% stronger in Yield and Tensile Strength than 4130 Series Chromoly..
$2,499.99
Ex Tax:$2,499.99
Features:1.5" High Clearance Trailing Arm Design increases ground clearance under key components.Manufactured with HCR Elite Alloy, 30% stronger than 4130 Series Chromoly.Improved approach angles reduce surface attraction and friction.To take the already impressive Can-Am Maverick X3 to the next lev..
$1,899.99
Ex Tax:$1,899.99
Features:Easy 100% bolt-on, no cut, no drill installationHigh-clearance A-arms and trailing armsMade out of HCR proprietary alloy—30% stronger than chromoly steel.Proudly made in the USATo take the already impressive X3 one step further, HCR has developed an American—made product to look, feel, and ..
$2,899.99
Ex Tax:$2,899.99
Features:1.5" High clearance A-Arm design allows for added ground clearance under key components. Manufactured with HCR Elite Alloy; 30% stronger than 4130 Series Chromoly Delrin bushings included for increased strength to mounting points. Internal catacomb design allow for increased ..
$3,399.99
Ex Tax:$3,399.99
Features:Easy installationHigh-clearance A-armsMade out of HCR proprietary alloy—30% stronger than chromoly steel.Proudly made in the USAImprove your Can-Am Maverick X3 64” with HCR Racing Dual Sport OEM Replacement Front A-Arms. They are a direct replacement for your OEM A-arms but significantly im..
$1,699.99
Ex Tax:$1,699.99
Features:American-made suspension kit designed for improved front-end stability and responsiveness.Lower shock mount reduces steering feedback for a smoother, more controlled ride.Upright front shock positioning enhances front-end stability and increases ground clearance over OEM kits.Made from HCR’..
$3,349.99
Ex Tax:$3,349.99
Features:Easy installationHigh-clearance A-armsMade out of HCR proprietary alloy—30% stronger than chromoly steel.Proudly made in the USAHCR took the already powerful X3 and made it even better. This American-made upgrade is built to look, feel, and perform better than stock parts. The HCR X3 suspen..
$1,699.99
Ex Tax:$1,699.99
Features:OEM Compatibility with OEM Radial Joints, Bolts, Hardware (except shock bolts)Heavy-duty Replacement designed for X RS 72" model Trailing ArmsIncreased Ground Clearance with +1.5 inches under key componentsImproved Approach Angles with reduced surface attraction and frictionProprietary Elit..
$1,599.99
Ex Tax:$1,599.99
Features:Bend design in A-arms and trailing arms adds 1.5” of ground clearanceManufactured with HCR Elite Alloy, 30% stronger than 4130 chromolyImproved approach angles reduce surface attraction and frictionHCR’s Can-Am Maverick X3 72" Dual-Sport kit is designed as an OEM suspension replacement kit ..
$3,299.99
Ex Tax:$3,299.99
Features:Designed to keep weight down while adding necessary strengthProvides a unique look that only HCR offersRetains the factory width of 72" with no added travelIncreased ground clearance with improved approach anglesSolid slate bottom surface to prevent getting caught on trail obstaclesHCR Susp..
$1,599.99
Ex Tax:$1,599.99
Features:This is a Heavy-Duty lightweight version front A-arm Replacement for the Can-Am Maverick X3 72" models. Adds 1.5" of ground clearance in the design of the lower A-armsStealth approach angles for a clean look and versatilitycomparable weight to Stock armsHCR Alloy construction boasting ..
$1,999.99
Ex Tax:$1,999.99
Features:High-clearance boxed front A-arms and high-clearance rear trailing arms provide 1.25” of added ground clearanceLaser-cut construction for precise fit and finishChromoly mounting points for increased structural integrityManufactured with HCR Elite Alloy, 30% stronger than 4130 chromolyTIG-we..
$3,599.99
Ex Tax:$3,599.99
Features:2” forward offset A-arms provide room for 32” tiresHigh-clearance front A-armsMaintains OEM machine widthTIG-welded by hand for strength and aestheticsInternal angled catacomb design for optimal force distributionLaser-cut construction for precise fit and finishCNC-cut chromoly mounting poi..
$1,024.99
Ex Tax:$1,024.99
Features:Increases width to 72"Overall width will depend on tire and wheel combinationAdds 3.3" to wheelbase for a total of 96”Suspension travel17.7" front20” rear with additional 1” wheel travelAdds 1.6” of clearance in the rearAdds 15 Lbs. overallLaser-cut construction for precision fit and finish..
$5,499.99
Ex Tax:$5,499.99
Features:4+ inches wider per side on the front and 5+inches wider per side on the rear for a total of 72" width all around to accommodate a uniform offset wheel for tire rotation and overall aesthetics Fiber Laser Cut construction for precise fit and finishCNC'd 4130 heat treated billet mountin..
$5,249.99
Ex Tax:$5,249.99
Features:ncreased wheelbase for more clearance to run up to 28” tires.Increases width by +5” per side for 72” total widthLaser-cut construction for precise fit and finishCNC'd Chromoly mounting points for increased integrityEach piece is TIG welded by hand for strength and aestheticsReuse of OEM bal..
$5,499.99
Ex Tax:$5,499.99
Features:72" Width compared to 68" from factoryAdds 10 pounds—roughly 2.5 lbs per cornerLaser-cut construction for precise fit and finishCNC'd chromoly mounting points for increased integrityHCR custom alloy boasts 30% more strength than chromolyHigh-clearance boxed front A-arm design Each piec..
$6,199.99
Ex Tax:$6,199.99
Features:Increased wheelbase for more clearance to run up to 28” tires.Increases width by +5” per side for 72” total widthLaser-cut construction for precise fit and finishCNC'd Chromoly mounting points for increased integrityEach piece is TIG welded by hand for strength and aestheticsReuse of OEM ba..
$5,499.99
Ex Tax:$5,499.99
Features:Increases width by +5” per side (72” wide total)Wheelbase increased by +2”1.25” of extra ground clearance from high-clearance A-armsDesigned for use with Exit ShocksHCR's Long-Travel General kit has been proven and tested over time and given similar design and strength properties as our ful..
$5,384.99
Ex Tax:$5,384.99
FeaturesForward A-Arm Suspension kit will add lift without adding shock brackets. Pushes front arms forward 2.5" allowing for more clearance in order to run larger tires. **Depending on tire manufacturer will fit up to 33" tires*100% Proudly Made in the U.S.A100% Bolt-on installation using fact..
$1,249.99
Ex Tax:$1,249.99
Features:Room for 35” tiresIncludes high-clearance front and rear A-arms100% bolt-on installationHCR custom alloy boasts 30% more strength than chromolyTIG-welded by hand for strength and aestheticsInternal angled catacomb design for optimal force distributionLaser-cut construction for precise fit a..
$5,149.99
Ex Tax:$5,149.99
HCR is proud to introduce the all-new Polaris Ranger front forward high clearance a-arms and high clearance rear arms, both with built-in lift. The front arms are pushed forward 2.5" to clear up to a 32" tire. To add to this we build the front and rear control arms to have up to an additional 2" lif..
$2,249.99
Ex Tax:$2,249.99
Looking to take your Polaris Ranger XD to the next level? Then look no further. The HCR Ranger XD Mid travel kit features an 8" wider stance to keep you stable and safe on any trail. Up to 18" of ground clearance with the use of 35" tires* to clear over large obstacles. This American made product is..
$5,249.99
Ex Tax:$5,249.99
Looking to take your Polaris Ranger to the next level? Then look no further. The HCR Ranger long travel kit features a 10" wider stance to keep you stable and safe. 12.25" front travel and 14.25" rear travel to eat up obstacles, and a front forward off set control arms to clear a 35" tire. This 100%..
$8,199.99
Ex Tax:$8,199.99
Features:2.5" forward offset front A-arms fit up to a 32” tireHigh-clearance front and rear A-arms at 2” of ground clearanceNo drilling or cutting requiredHCR custom alloy boasts 30% more strength than chromolyTIG-welded by hand for strength and aestheticsInternal angled catacomb design for optimal ..
$2,749.99
Ex Tax:$2,749.99
The long-awaited HCR Racing, Polaris RZR Pro R / Turbo R OEM Replacement Kit is finally here! We bring you the ultimate strength and clearance stamped with the HCR badge and backed with our lifetime warranty. Constructed from our Signature HCR Proprietary Elite Material, the Turbo R OEM Replace..
$3,249.99
Ex Tax:$3,249.99
Features:Adjustable upper control arm using 3/4 inch heims to allow for control of camber & casterConstructed from HCR alloy (30% stronger than 4130 chromoly)Internally gusseted and bracedLower A-arms gain 3” of ground clearanceOEM geometry & width4130 chromoly billet receiver endsThe long-a..
$4,499.99
Ex Tax:$4,499.99
Features:Front A-arms provide an additional 3” of ground clearanceTrailing arms provide an additional 2” of ground clearanceChromoly mounting points for increased structural integrityManufactured with HCR Elite Alloy, 30% stronger than 4130 chromolyTIG-welded by hand for strength and aestheticsInter..
$5,249.99
Ex Tax:$5,249.99FeaturesFront A-arms provide an additional 3” of ground clearanceTrailing arms provide an additional 2” of ground clearanceAdjustable 3/4” heim jointsHCR custom alloy boasts 30% more strength than chromolyTIG-welded by hand for strength and aestheticsInternal angled catacomb design for optimal force..
$6,799.99
Ex Tax:$6,799.99
These Dual Sport High-Clearance Rear Trailing Arms for the Polaris RZR Pro XP follow HCR's blueprint of quality manufacturing and craftsmanship. They’re constructed with HCR’s Elite material. This proprietary material boasts 30% stronger tensile and yield strength compared to 4130 chromoly. The mate..
$1,499.99
Ex Tax:$1,499.99
HCR Racing is excited to announce an all-new kit that enhances their product line for the popular Polaris RZR PRO XP. This all new Long-Travel Suspension Kit comes from the industry leader in suspension products that adds to their line of OEM Replacement kits and their Long-Travel Suspension Systems..
$5,699.99
Ex Tax:$5,699.99
HCR Racing's Dual Sport OEM Replacement A-Arms for the Polaris RZR Pro XP are designed to boost performance and durability. Made from HCR’s custom alloy, 30% stronger than 4130 Chromoly, these A-arms offer superior strength and wear resistance. Engineered for precision and fitment, they ensure smoot..
$2,099.99
Ex Tax:$2,099.99
HCR’s special billet, slot-and-tab design and honeycomb arms are built strong to handle tough off-road riding, while still looking great. Every weld you see on the outside connects to a strong plate inside the arm for extra support.Instead of using cheaper tube ends for ball joints like others do, H..
$2,999.99
Ex Tax:$2,999.99
The Duner Long-Travel Suspension Kit for the Polaris RZR Pro XP offers sleek design, increased clearance, and improved performance. It adds 1.25” of clearance under the Front A-arm and 3” in the Rear Trailing Arm, while also providing +4” of travel and stability. The kit maintains OEM caster and cam..
$5,399.99
Ex Tax:$5,399.99
HCR Suspension has built an aggressive platform for the RS1 Series with our MTS Suspension kit. This kits offer +3 inches per side and an additional wheel base of +3 inches all while utilizing factory shocks. This suspension kit will improve ride quality, stabilization and control of the unit overal..
$4,599.99
Ex Tax:$4,599.99
This Dual Sport High-Clearance Suspension Kit for Polaris RZR RS1 follow HCR's blueprint of quality manufacturing and craftsmanship. The quality fit and finish, ease of installation, and top shelf performance of these kits set HCR Racing apart. Through intensive craftsmanship, meticulous precision, ..
$2,949.99
Ex Tax:$2,949.99
